Appendix XVII

(see Table 14.3 (note i))

Categories of Materials of Storage of Warehouse AS Per Combustion Risk.

A. Non-combustible materials:

Articles (which are Non- Combustible, Non -Flammable, Non -Corrosive, Non -toxic, Non-poisonous, Non-Explosive) such as Cement, brick, mortar, hardware items, metals in solid bar/metal goods (excluding those having melting point below 1000 o C)

1. Any new use which increase the number of occupants to a figure comparable with other classes of occupancy shall change the classification of the building to that of the new use (for example, Warehouse used for Office purposes).

2. Ware house buildings shall not include any article which is highly combustible or explosive materials or products which are liable to bum with extreme rapidity and or which may produce poisonous fumes or explosions for storage, handling and which involve highly corrosive, toxic or noxious alkalis, acids or other liquids or chemicals producing flame, fumes and explosive, poisonous, irritant or corrosive gases; and for the storage, handling of any material producing explosive mixtures of dust which result in the division of matter in to fine particles subject to spontaneous ignition as such buildings fall in Hazardous Building Category.

Forms

(see clause 3.10.2, 3.13, 3.16.10(1))

Details to BE Contained and to BE Attached to the Application Form for Building Licence.

1. Name and address of the Applicant;

2. Identification proof of the Applicant;

3. Whether the Applicant is the owner of the plot or GPA holder or Promoter, representing the Owner;

4. Survey No., Village, Taluk and District of the plot and other description of plot;

5. Type of Building licence required (for new construction, addition / alteration, revises licence);

6. Documents enclosed with the Application;

7. Drawings or Details enclosed with the Application;

8. Details of Professionals on Record to prepare the drawings;

9. Details of Professionals on Record to supervise the works (compulsory in case B3, B4 and B5 types of buildings);

10. Affidavit and indemnity for basement floor construction;

11. Specifications of the building enclosed with the application (in the format notified by the government); and

12. Affidavit of applicant and professionals on record for drawings and supervision enclosed with the application (in the format notified by the government).

FORM-II (see clause 3.10.2, 3.17.2)

DETAILS TO BE CONTAINED AND TO BE ATTACHED TO THE APPLICATION FOR NOCS FROM DIFFERENT DEPARTMENTS (as specified by the concerned department), IN ADDITION TO THE DETAILS REQUIRED FOR BUILDING LICENCE IN FORM-I (COMMON APPLICATION FORM)

IIa. From Department of Fire and Emergency Services

IIb. From Environment Cell (see clause 15.1.1, 15.1.2, 15.1.3)

IIc. From Airport Authority of India

IId. From Coastal Regulation Zone Authority

IIe. From Karnataka State Water Supply and Drainage Board

IIf. From Indian Railways

IIg. From Metro rail corporation

IIh. From Heritage conservation committee

IIi. From National Monuments Authority

IIj. From Urban Arts Commission

After completion of the works at site as per the conditions of NOC, the applicant shall apply for clearance / certificate of approval from the departments which have issued NOCs, in Form II by filling the relevant portions of the Form.

FORM-III (see clause 3.10.3)

Details to BE Contained in the Endorsement Issued by the Authority to the Applicant Regarding Discrepancy in the Documents Submitted

1. Name and address of the Applicant;

2. Details of the application for building licence;

3. Document having discrepancy;

4. Details of discrepancy; and

5. Details of rectification proposed, if any.

FORM-IV (see clause 3.10.4(2))

Details to BE Contained in the Endorsement Issued by the Authority to the Applicant Regarding Discrepancy in the Plans and Details Submitted for Sanction of Building Licence

1. Name and address of the Applicant;

2. Details of the application for building licence;

3. Drawings having discrepancy (specify for each drawing separately);

4. Details of discrepancy in drawings (specify for each drawing separately);

5. Details of discrepancy in the conditions for obtaining NOCs from other departments; and

6. Details of rectification proposed, if any.

(see clause 3.10.6(1))

Details to BE Contained in the Intimation Letter of the Authority to Empanelled Professional for Site Inspection and Submission of Site Inspection Report for Approval of Site Plan

1. Name and address of the Applicant;

2. Details of the application for building licence;

3. Name and address of the Professional on record for preparing drawing;

4. Details of the building site in which building licence is applied for;

5. Copies of the relevant documents; and

6. Details of the site plan and other technical drawings and details submitted.

FORM-VI (see clause 3.10.6 (2))

Details to BE Contained in the Site Inspection Report

1. Name and the address of the Applicant;

2. Name and the address of the professional on record for drawings;

3. Name and the address of the Empanelled professional or designated officer;

4. Particulars of the Plot;

5. Date of inspection;

6. Noting of site inspection;

7. Acknowledgement of applicant and professional on record; and

8. Date of submission of report.

(see clause 3.10.7)

Details to BE Contained in the Endorsement Issued by the Authority to the

1. Name and address of the Applicant;

2. Details of the application for building licence;

3. Name and address of the Professional on record for preparing drawing;

4. Name and address of the empanelled professional who has submitted the inspection report;

5. Drawings having discrepancy (specify for each drawing separately);

6. Details of discrepancy in drawings (specify for each drawing separately); and

7. Details of rectification proposed, if any;

(see clause 3.15.1)

1. Name and address of ULB with logo;

2. Type of building licence;

3. Building licence no. and date;

4. Plot approval details;

5. Particulars of Plot;

6. Name and address of Applicant;

7. Name and address of Professionals on record for drawings;

8. Name and address of Professionals on record for supervision;

9. Particulars of the building (floor area, construction area, parking details, etc.,);

10. NOCs received;

11. Various fees paid;

12. Licence validity period;

13. Other Terms and conditions of licence; and

14. Seal and signature of CEO

FORM-VIIIA (see clause 3.16.4(3))

1. Name and address of ULB with logo;

2. Type of building licence;

3. Building licence no. and date;

4. Name and address of Applicant;

5. Name and address of Professionals on record for drawings;

6. Name and address of Professionals on record for supervision;

7. Particulars of the building (floor area, construction area, parking details, etc.,);

8. Reference of Site Inspection Report of Empanelled Professional;

9. Initial Validity period of Licence;

10. Other Terms and conditions of licence; and

11. Seal and signature of CEO.

FORM-IX (see clause 3.16.5 (1))

1. Name and address of the Applicant;

2. Details of the building licence (extent of site, existing and proposed width of roads abutting the road and name of roads as per the records of the Authority, no. of building blocks and for each block – no. of floors, all-round setbacks, no. of basement floors, total floor area eligible and proposed – permissible, premium and TDR, no. of 4-wheeler and 2-wheeler parking required and provided, including visitors parking – within the building and outside the building, both covered and open);

3. Details of Professionals on Record to prepare the drawings;

4. Details of Professionals on Record to supervise the works;

5. Site plan; and

6. 3D view of the building (if proposed in any advertisement of the promoter).

(see clause 3.16.7(3 and 4), 3.16.9(1), 3.17.2(10 and 11))

Details to BE Contained in the Site Inspection Report of Empanelled Professional, Certifying the Works or Stating the Defects / Deviations in Works Executed at Site.

1. Name and address of the Applicant;

2. Name and address of the professional on record for supervision;

3. Name and address of contractor executing work;

4. Name and address of empanelled professional;

5. Name and address of the Authority;

6. Particulars of the Plot;

7. Noting of site inspection (stating the defects / deviations in works executed, from the approved plans, specifying the related drawing);

8. Acknowledgement of applicant and professional on record;

9. Date of inspection; and

10. Date of submission of report.

FORM-XI (see clause 3.16.7(5))

Details to BE Contained in the Endorsement Issued by the Authority to the Applicant to Rectify the Defects in Works Executed.

1. Name and address of the Applicant;

2. Details of the application for building licence;

3. Name and address of the Professional on record for supervision;

4. Name and address of the empanelled professional who has submitted the inspection report;

5. Works having defects / deviations from approved drawings (specify for each drawing separately);

6. Details of discrepancy in works executed (specify for each drawing separately); and

7. Details of rectification proposed, if any.